Welding Gloves

Best Welding Gloves For Welders – [MIG,TIG & Stick]

You should first know, “What are welding gloves?” It’s an essential individual protection equipment when you perform welding in any type of environment, either in the workshop or in domestic places, since due to its base material of manufacture, which is usually leather such as cow or goat skin, and its design gives protection to your hands and wrists to prevent damage to them.

The damages that your hands and wrists can suffer are usually bumps or scratches caused by the metal parts that you are welding, or also by improper handling of the work tools that you are using.

Other important injuries to hands and wrists are burns of varying degrees caused by welding flames or improper handling of newly welded metal parts at high temperatures.

If you are looking for welding gloves but you don’t know which one to buy? In this complete guide, we bring the solution. It is important to mention that gloves are one of the essential protection accessories to guarantee the safety of workers when welding.

In addition, welders will find all of its PPE on our blog, such as helmets, aprons, pants, and various tools.

How Important are Gloves for the Welder?

The hands are one of the most notable parts of the human body; they fit into one of the 5 senses of the human being (touch) and facilitate daily activities that would be complex or difficult to carry out if they were missing.

The hands extend from the wrist to the tips of the fingers (thumb, index, middle, ring and little finger) allow you to grasp objects and manipulate small parts with great precision.

The movement orders are issued by the brain and are controlled by the muscles found in the forearm. The hand is held by simple ligaments and is so delicate that at the time of undergoing a modification the entire operational system is altered.

Hands are exposed to constant risks in certain operations (welding):

  • Mechanical risks.
  • Thermal risks.
  • Chemical hazards.
  • Biological risks.
  • Electrical hazards.
  • Vibrations.
  • Ionizing radiation.

These can cause severe accidents such as cutting wounds, burns, blisters, crushing scrapes, amputation and psychological damage.

The workplace safety statistics argue that 35% of workplace accidents in welding are related to the hands and their results are severe irreparable sequelae.

Why Welders Wear Welding Gloves?

Welding gloves – Personal Protective Equipment (PPE) If you are an expert welder or simply fond of this workshop work, you must take into account the importance of protecting the parts of your body that may be in direct contact with risks present in welding, such as blows or cuts by pieces metal, or burns of varying degrees caused by the welding arc.

You are sure that you have to perform the welding work with your hands. You also know that this tool protects your hinges and fingers from the heat of fire. So this personal protection equipment will protect your hands properly.

Nonetheless, we can assure you that in this article you will find a list of the best welding gloves on the market. Not only that, there are different opinions, prices, and technical details. There are more details on the pros and cons of each individual.

Welding Gloves Features

Next, we will mention the main characteristics of the established regulations that safety gloves for welders must comply with. Among the characteristics that correspond to the elements they must contain are:

  • First of all, the welder’s gloves come with the name of the manufacturing brand. So that in this way, the user can identify where the product to buy comes from.
  • Another aspect to take into account is the size of its. Depending on the type of welding they should be larger. In the case of TIG welding they should be adjusted and in the use of electrodes a larger size. For this reason, there are different sizes for safety gloves.
  • In addition, the gloves are marked with the standards established in UNE EN. These standards disclose whether it comes with a degree of protection against thermal or mechanical risks. It is considered one of the necessary aspects in welding gloves, so that users have prior knowledge.
  • Other characteristics of the gloves is that the material is made of cowhide or split leather. Since they guarantee greater resistance and durability of the product.
    On the other hand, most safety gloves are lined with cotton as this gives more comfort and favors the absorption of sweat from the hands.
  • Also, they have essential properties to guarantee a good grip when handling in this case the different types of welders.
  • In addition, they are gloves that protect both the hands and part of the arms, for greater safety when in contact with high temperatures and can work comfortably.

Advantages of Wearing Welding Gloves

The main advantage of using welding gloves is to protect your hands and wrists from probable burns of varying levels, bumps or tears that they may suffer while doing welding work in any type of situation.

How Ergonomic can Your Welding Gloves be?

A pair of welder’s gloves whose manufacturing material has a suitable thickness that allows appropriate mobility of your fingers, and whose dimensions are adjusted to the size of hands of various physiognomies that welders users have, represents the degree of ergonomics that the gloves can offer you.

How are welding gloves used?

The welding gloves that you can find on the market are made to completely cover your hands and wrists; It is for this reason that welding gloves are personal protective equipment that you use through your hands.

A primary function of welding gloves during use is to allow you to move all the fingers of your hands with great comfort and ease to hold firmly all those materials or tools that you need to handle to perform welding.

The use of welding gloves is quite simple and practical; you can do it by following the steps below:

  • You take the pair of welding gloves.
  • You insert your right hand into the corresponding welder’s glove.
  • You insert your left hand into the corresponding welder’s glove.
  • You verify that your hands and wrists are completely covered.

You make any necessary adjustments to your welding gloves to accommodate the lace on your hands and wrists, in case they have not been fully covered.
Firmly hold the tools and materials needed to perform the welding. You run the welding.
By performing the steps mentioned above in a proper manner, you can put your welding gloves to effective use and protect yourself against welding hazards.

What are the Best Types of Welder Gloves?

The types of welding gloves are given by the type of welding you are going to carry out and you need to use them. It is for this reason that you must keep in mind the types of welding that exist, and in this way be able to categorize the type of welding that you are going to carry out, and thus select the appropriate welding gloves that provide you with the greatest protection.

Among, the most common arc welding processes are the following:

MIG welding: It is the type of welding that is carried out by inert metal gas.
TIG welding: It is the type of welding carried out by inert tungsten gas.
Category A
They are the welding gloves that have a lower level of dexterity but provide greater protection. Its use is recommended for MIG welding.

Category B
They are the welding gloves that have the highest level of dexterity but provide less protection. Its use is recommended for TIG welding.

There are several best types of welding gloves. In this content we will explain each of them:

01. Welder Leather Gloves

All gloves for welders are made of leather, these can be made of cowhide, split leather, among others.
These leather gloves have many advantages to be used in different welding jobs. They are characterized by protecting against abrasion, heat, among others.

Leather has certain natural properties, making it the best material for making safety gloves.
It can withstand high temperatures, does not ignite on contact with fire and resists great wear and tear derived from work.
It should be mentioned that there are a wide variety of models and brands of leather welder gloves, which will undoubtedly be a great protection accessory.

extreme-high-heat-resistant-gloves

It would not be wrong to say that gloves are one of the PPE. Because it keeps the hand safe. However, not any gloves, it must be extremely high heat-resistant gloves or leather made. This RAPICCA 16 Inches, 932 is the best gloves for welding.  

Notable features of the gloves are; 

  1. Extreme heat-resistant, oil resistant, and cut resistant.
  2. Reinforced Kevlar Padding On Five Fingers
  3. Reinforced Kavlar Padding On Elbow
  4. Reinforced Kavlar Padding On Back
  5. Flame Retardant Insulated Liner
  6. Long Sleeve to Protect your Forearm

So it is the best welding gloves for MIG, TIG and Stick Welders.

02. Musketeer Welding Glove

Musketeer gloves in this case for the use of welding work provide excellent resistance to tearing and abrasion, which has to do with the ability to remove something that has friction. Most of these types of gloves are robust for added protection in heavy work.

In the same way, you can find them in different sizes and models for the user’s preference that will fit without problems. On the other hand, they have a totally uniform finish; they do not discolor, perfect to protect against any type of perforation.

03. Long welding gloves

Other best types of welding gloves that you can find are long ones. Which are made of quality materials, such as cowhide. These are the ones that they mainly recommend to guarantee greater protection when working with high temperatures, heat, among others.

Many brands of welding gloves have a large number of models of long gloves, which not only cover the hands but also part of the arms. In addition, they have thermal and mechanical protection, are easy to use and provide a good grip. The best thing about these gloves is that you can use them in any type of welding work.

04. Kevlar welder glove

First of all, it should be mentioned that Kevlar is a polyamide. Which is characterized by being a material used for the elaboration of threads with great resistance and where breakage is very difficult. It is for this reason that you can find welding gloves with Kevlar thread seams, which will provide safety in welding work.

Its main use is for the production of protective accessories , such as welding gloves. They form a composite material, which guarantees the durability of the accessories. Without a doubt, it is advisable to look for this type of glove models that have Kevlar seams.

What Welding Gloves to Buy? Guide to Choose the Best!

Without a doubt, you can choose a welding glove after being our expert guide. Buy the best because it is very difficult.

There are many famous brands and models in the market and it is very difficult to buy the best from there. We have now reviewed the description of some gloves of the reputation brands.

Now, we’ve got three elements based on that review that you can consider choosing the best glove.

Now those three elements are given below;

01. Type of welding you are going to use

The first thing to keep in mind is that you should choose gloves, depending on the type of welding you generally work with:

In case you frequently use TIG welding, it is recommended to use gloves with goatskin leather, providing excellent dexterity and durability. 

On the other hand, more fire heat is felt during the MIG welding, so a high-temperature resistant leather glove is needed.

02. Choose the material that suits you best

Also, it is important to choose the right material. What is generally recommended is to have leather gloves for the welder. 

Since this material is resistant to abrasion, welding sparks and gives greater protection against pointed objects.

03. Comfort above all

Finally, it is important that you choose the appropriate size. This will give you excellent comfort. 

Similarly, it is recommended that the interior of them be made of cotton for greater flexibility and absorption of hand sweat.

Leave a Comment

Your email address will not be published. Required fields are marked *